|
|
- EastCoast PowderCoat is a custom
shop which requires ample time to ensure that each customer receives
high quality coating and preparations -- although we have a fast
turn around of 7-14 days (some cases less, some jobs more) patience
is always appreciated.
- Custom work and metal restoration
requires a certain skill, technique, products, time and materials --
we transform each piece of metal to a bare metal state--our prices
reflect this. Price quotes are only a guideline and prices may
change accordingly.
- REMEMBER: Glossy is
not always better. We highly recommend that you choose a finish that will flatter your part's
condition. (i.e., Pitted parts and poor castings should be coated with a
wrinkle/gator or vein finish.) ECPC can help recommend a coating for you.
-
Highlights on raised surfaces: (i.e.,
valve covers & cylinders) additional . Two (2) tone colors, additional
cost.
- Minimum shop charge billed at a rate of
$75.00 per hour.
-
Group pieces together if you are planning
a single color choice. This
will avoid additional set up charges.
-
Parts must be clean and free of all oils, any degreasing by ECPC will be
charged at $75.00 per hour.
- Parts must be totally disassembled.
ECPC does not remove parts. (i.e., Seals, bushings, gaskets, bearings and
races.)
Any removal of parts/seals $75.00 per hour charge. ECPC will not
reassemble any parts - all parts will be returned with coated piece(s).
- Parts can not contain any bondo or body
filler. Bondo will ruin the coating. Some minor imperfections may be filled by
our process. Call for details.
-
Clear coats can be applied to almost all
powders for a look of depth and gloss. A 25% additional charge applies for
this service. NOTE: Some colors require a clear coat, (i.e., metallics,
silver, dormants, etc.). If you decide to have us clear coat your parts
after your initial run of part's, A 40% additional charge applies.
-
Powder can be applied over all your old
chrome parts if media blasted. ECPC does not guarantee coatings over old,
distressed chrome.
-
Prices quoted are for "in Stock"
colors. Custom colors are available at additional cost. Additional costs may
vary due to color and quantity of powder ordered.
-
Additional
charges will apply to "rush" jobs and for parts that remain in
storage longer than 7 business days after powder coating has been completed
and contact has been made for pick-up. Any items left for more than 30
(thirty) days becomes property of ECPC.
|
-
ECPC assumes no responsibility or has no control over nicks, cuts, scratches or any other abusive wear and tear during any consumers usage once
parts have been powder coated.
-
Due to environment, consumer usage,
metal construction and fabrication variances we are unable to
provide refunds or warrantees against damage or wear to our powder
and ceramic coatings. All sales are final.
-
No warranty over old chrome that has begun to corrode, flake, peel, etc.
-
Not responsible for poorly casted parts that may have surface
imperfections.
-
Not responsible for burnt powder coating if
temperature(s) exceed the maximum powder coating temperature
limit(s) (1000°
for high temp powders - 300° for all other powders) once part(s)
have been installed or used.
Shipping Options:
Ship via UPS or USPS priority mail. Complete
required shipping form.
These methods make it easy to trace and insure your shipment. A 50% deposit is
required with all part shipments, make payment with PayPal
on- line now with your debit or credit card or enclose a check or money
order with your shipment.
Packaging
Instructions:
Pad
your parts well! Parts may become damaged in shipment. ECPC is not
responsible for any damages which occur during shipping. Damages must be
handled through the company that your parts were shipped with. Use the
required ECPC shipping form. Complete all sections.
Packing
list of contents:
Please
enclose with your parts a packing list of all parts, ECPC's on-line shipping
form filled out in its entirety. Also include 50 % deposit payment. ECPC
accepts Certified Checks, Money Orders or personal checks. Pay now with your
credit or debit card via PayPal.
Important
Information:
Media
Blasting and Chemical pretreatment has been performed on your parts. It's the
consumers responsibility to thoroughly clean all parts before reassembling. It
is recommended that all parts are tapped, all holes
and threads are cleaned before reassembling. ECPC is not responsible for any part failure due to
improper cleaning before assembly.
|
